Installin
and Confi
urin
the Module
20
840 USE 115 00 Version 1.0
2.3 Changing the Default Configuration
If an
of the followin
conditions appl
,
ou should stop the controller, then install
the module, then chan
e the default confi
uration
before
startin
the controller
a
ain:
The module will be communicatin
on an open Ethernet network.
The module’s IP address is alread
in use.
The network uses IEEE 802.3 framin
.
You must specif
a default Ethernet
atewa
and subnet mask.
If
ou chan
e the confi
uration after installin
the module,
ou must reset the
module for
our chan
es to take effect.
You ma
confi
ure the module usin
Modsoft or Concept.
2.4 Configuring the Module with Modsoft
From the Modsoft Confi
uration Overview screen, select the
Cfg Ext
pulldown
menu.
Be sure that
ou have specified sufficient memor
resources for the Ethernet
confi
uration extension in the
Cfg. Extension Size
field. The first Ethernet module
confi
ured re
uires 20 words. Each additional module re
uires an additional 16
words.
From the options, select
TCP/IP Setup
. You will reach the Ethernet confi
uration
extension screen.
Comments to this Manuals