Installin
and Confi
urin
the Module
24
840 USE 115 00 Version 1.0
2.5 Configuring the Module with Concept
Once the Ethernet web embedded server module has been installed in the
backplane and
ou have consulted
our network administrator about whether to
chan
e the IP address or framin
or to specif
a
atewa
or subnet mask:
1.
Open the Concept pro
ect without connectin
to the controller. The controller
and I/O should be confi
ured.
2.
Set the number of Ethernet modules in the confi
uration extension.
3.
Enter each Ethernet module in the I/O map.
4.
Fill in the parameter dialo
box for each Ethernet module.
5.
Save the pro
ect.
6.
Connect to the controller.
7.
Open the online control panel. Clear the existin
confi
uration of the controller.
8.
Download the pro
ect, includin
the confi
uration, to the controller. Do not start
the controller. Leave the dialo
open.
9.
Reset the Ethernet web embedded server module in the backplane
hot swap
.
Wait until the Link indicator li
hts.
10.
Start the controller. This will close the dialo
box.
Figure 15 Parameter Dialog for an Ethernet Web Embedded Server Module
Comments to this Manuals